首頁
 |
P2 Standard 後級擴大機
◆ 325W(8Ω) / 2聲道 ◆ 環形變壓器 / 各聲道獨立Mono設計 ◆ 加拿大原裝
 |
 |
 |
實售價 NT $350,000.元
保固一年
加拿大原廠製造
General
Inputs 2 Single-Ended, 2 Balanced, 1 Relay Trigger (3.5 mm Mono Jack) Outputs 2 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack) THD+N (225 W into 8 Ω) 0.0007% at 1 kHz, 0.008% at 20 kHz IMD 0.00019% (CCIF, 325 W into 8 Ω) POWER BANDWIDTH 10 Hz to 150 kHz
(+0 -3 dB, 325 W into 8 Ω)FREQUENCY RESPONSE 20 Hz to 20 kHz (+0 -0.15 dB),
5 Hz to 100 kHz (+0 -2 dB)INPUT SENSITIVITY (RCA and XLR 0 dB inputs) 1 Vrms in for 28.3 Vrms out
(100 W into 8 Ω)INPUT IMPEDANCE 18 kΩ (RCA), 22 kΩ (XLR) DAMPING FACTOR >600 at 20 Hz, 400 at 1 kHz (ref. 8 Ω) S/N RATIO 125 dB, A-weighted (ref. 325 W) CROSSTALK (between any two channels) -140 dB (20 Hz), -80 dB (20 kHz) VOLTAGE GAIN 29 dB SLEW RATE 40 V/µs SWITCHES
Front Panel Power (On/Off) Rear Panel On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB) POWER OUTPUT
(Per channel, continuous RMS, 20 Hz to 20 kHz, <0.1% THD, one or all channels driven.)
Statement P2 and P5 amplifiers are stable into any impedance down to a short circuit at full output.Impedance 8Ω 4Ω 2Ω # of Channels Driven 1 All 1 All 1 All 325 W 325 W 500 W 500 W 675 W 675 W POWER REQUIREMENTS
SUPPLY VOLTAGE 105 to 130 V, 60 Hz POWER CONSUMPTION 1800 W DIMENSIONS
Height 9-3/8 inches (23.8 cm) including feet Width Faceplate 19-1/4 inches (49 cm)
Chassis 17-1/4 inches (43.8 cm)Depth 22-1/2 inches (57.2 cm) including handles Weight (unpacked) 75 lb (34 kg)
